How to solve the problem when the metal shredder vibrates?

The metal shredder is a kind of mechanical equipment specially used to process metal. The waste plastic processed by the metal shredder not only improves the utilization of resources, but also reduces the waste of raw materials and also improves our living environment. But as a Mechanical equipment will inevitably have failures of one kind or another during daily work. For example, if a metal shredder vibrates during production, how should we solve it?

1. If it is caused by the non-concentricity of the rotors of the metal shredder, we can move the position of the motor to the left or right, or add pads under the motor feet to adjust the concentricity of the two rotors.

2. When the vibration frequency of the metal shredder is high, it may also be caused by the non-concentric connection between the coupling and the rotor, or the uneven quality of the flat hammer inside the rotor. At this time, corresponding methods should be adopted according to different types of couplings.

3. The vibration of the metal shredder may also be caused by the equipment itself not reaching balance. This may be because the fixation of the metal shredder is not strong enough. This problem can be easily solved. You only need to ensure that the metal shredder is firm. The anchor bolts should be tightened to avoid vibration of the metal shredder. phenomenon.

In short, if the metal shredder vibrates during the production process, it must be stopped immediately for inspection, find out the cause, and take measures to deal with it.

What aspects should be considered when choosing a metal shredder?

Since there are many models of metal shredder equipment on the market, users will have some troubles when purchasing equipment. Taking the model of the equipment as an example, what conditions are based on when choosing a metal shredder?

First of all, you must choose based on the output. Because the scale, technical level, and financial status of each material processing plant are different, the requirements for output are also different, because different types of metal shredders also have corresponding outputs. Therefore, users should consider their own requirements for output when choosing, and then choose the corresponding equipment.

Secondly, because the quality of the property boxes of different types of metal shredders are also different, the materials they are suitable for also have certain differences. Therefore, when purchasing equipment, users must have a comprehensive understanding of the characteristics of the materials and the characteristics of the equipment itself. , thereby perfectly matching the equipment type and material properties.

The last step is to choose the configuration of the equipment. Even if the equipment has the same model, its configuration will be different. Just like cars, there are low, medium and high configurations. Of course, the same is true for shredders. The price will be different in different configurations. Therefore, users can choose the metal shredder equipment that suits them according to their own situation when purchasing.

Analysis on the importance of double-shaft shredder test run

We all have the experience of trying things out when buying things in our lives, such as clothes, electronic products, etc. Of course, a double-shaft shredder must be tested first when purchasing, which is the same as when we usually buy daily necessities. Logically speaking, when we buy a double-shaft shredder, we must first test it and then decide whether this equipment is worth buying. So what role does the test machine play, and what aspects of the equipment is it used to test?

First of all, we need to look at the situation after the material enters the inside of the equipment. Due to unreasonable design, some equipment seems to be very good equipment, but after the initial test run, the material repeatedly spins around the feeding port but does not enter. This situation is what we call not eating. If this situation occurs, it means that there is something wrong with the blade of the double-shaft shredder, or the design of the equipment itself is unreasonable. A qualified double-shaft shredder product, It is necessary to achieve smooth feeding, uniform discharging, high output and good efficiency. We need to set up the test machine to achieve a reasonable and normal process of crushing, feeding, discharging and so on.

When there is no problem with the incoming and outgoing materials of the double-shaft shredder, the next step is the sound of the shredder. The sound made when the equipment is used is also very critical. The double-shaft shredder will make some sounds during the material processing. This is a normal phenomenon, but if the sound is too loud and accompanied by vibration, it means that the installation of the double-shaft shredder is not in place, the length of the blade is not uniform, or the material used in the equipment itself is not good enough, etc. Therefore, it can be seen how important the test run of the double-shaft shredder is.

When installing and debugging the scrap iron shredder, you need to pay attention to the following points:

The scrap iron shredder is a special crushing equipment for waste plastics. With the rapid development of the machinery industry, the scrap iron shredder is also constantly being researched and improved. More and more people are taking a fancy to the scrap iron shredder. If you want to invest in development potential, you will encounter a problem after purchasing the equipment. How to install the scrap iron shredder correctly? The installation of the scrap iron shredder will affect the output and work efficiency of the entire equipment, and even It will affect the stability and service life of the equipment, so you must follow the relevant procedures during installation. Let me share with you a few points that we need to pay attention to when installing the scrap iron shredder.

1. Before installation, please carefully review the relevant steps of installing the scrap iron shredder and keep these installation processes in mind.

2. Confirm whether the parts of each part of the scrap metal shredder match and whether there are any missing or mismatched parts.

3. After confirming the parts and accessories, we need to perform a simple cleaning of these parts first. If the parts where lubricating oil is injected, they do not need to be cleaned first.

4. Install according to the installation steps in the manual, and ensure the compatibility of each internal component of the scrap iron shredder. Do not install by skipping steps. This will only result in failure to install normally or damage to the internal components. Various performance and stability are reduced.

5. After assembling the scrap iron shredder according to the installation instructions, we can check whether the gaps between each component are too large, whether there is any reverse installation, and conduct an overall inspection of the scrap iron shredder.

6. After the installation is completed, test the machine first. If everything is normal and there is no noise, normal work can be carried out.